10
6. Identify the Right Handrail (85). Remove the tie
from the 5/16" Cage Nut (102). If necessary,
press the Cage Nut back into place.
Hold the Right Handrail (85) near the Right
Upright (90). Tie the wire tie (A) in the Right
Handrail securely around the end of the Upright
Wire (81). Then, pull the Upright Wire through
the bracket (D) on the bottom of the Right
Handrail and out of the end of the Right Handrail.
Attach the Right Handrail (85) to the Right
Upright (90) with a 5/16" x 1" Bolt (28), a 5/16"
Star Washer (11), and two 5/16" x 1" Flat Head
Screws (18) as shown; do not tighten the Bolt
and the Flat Head Screws yet.
18
85
90
81
102
28
11
A
D
6
7. Remove the tie from the 5/16" Cage Nut (102)
in the Left Handrail (84). If necessary, press the
Cage Nut back into place.
Attach the Left Handrail (84) to the Left Upright
(89) with a 5/16" x 1" Bolt (28), a 5/16" Star
Washer (11), and two 5/16" x 1" Flat Head
Screws (18) as shown; do not tighten the Bolt
and the Flat Head Screws yet.
7
28
102
11
89
18
84