8. 8
Identify the Left and Right Trays (36, 27), which
are marked "Left" and "Right."
Attach the Trays (36, 27) to the Console Base
(94) with eight #8 x 1/2" Screws (1). Note: It
may be easier to start the two inside Screws
and then slide the Trays into place before
tightening the other six Screws.
Note: It may be necessary to rotate the
Console Frame (104) upward when attaching
the Trays (36, 27).
27
36
94
.
Attach the Left Outside Upright Cover (87) and
the Right Outside Upright Cover (96) to the Left
and Right Uprights (89, 90) with a #8 x 1/2"
Screw (1). Be careful not to overtighten the
Screws.
96
11
To Next Page
Loading...
