NordicTrack C900 - Page 11

11
9. IMPORTANT: To avoid damaging the
Crossbar (93), do not use power tools and
do not overtighten the #10 x 3/4" Screws (9).
Orient the Crossbar (93) as shown. Tighten all
f
our #10 x 3/4" Screws (9) about halfway into
the Handrails (87, 88). Then, slide the Crossbar
as far forward as possible, and tighten the four
Screws.
9
3
88
9
9
9
87
10. Attach the Console Frame (104) to the
Handrails (87, 88) with four 5/16" x 1 1/2" Bolts
(4) and four 5/16" Star Washers (11). Start all
four Bolts, and then tighten them.
10
104
87
88
4
11
4
11