NordicTrack E 400 - Page 13

13
16
28
23
27
100
27
16. Identify a Bracket Cover A (28) and a Bracket
Cover B (100), and orient them as shown.
Press the Bracket Covers A and B (28, 100)
together around the right Pedal Arm Bracket
(23). Then, attach them with two M5 x 10mm
Screws (27).
Repeat this step on the other side of the
elliptical.
15. Identify a Pedal Arm Cover A (36) and a Pedal
Arm Cover B (101), and orient them as shown.
Press the Pedal Arm Covers A and B (36, 101)
together around the Right Pedal Arm (8). Then,
attach them with four M4 x 18mm Screws (35).
Repeat this step for the Left Pedal Arm (98).
36
98
35
8
35
101
15