5
M10 x 20mm
Screw (26)–2
M10 Locknut
(31)–2
M10 Split
Washer (25)–2
M10 x 80mm Shoulder Bolt (37)–2
M10 Bright
Washer (30)–2
M12 Washer
(38)–2
M10 Washer
(59)–2
M8 Washer
(12)–6
M8 x 45mm
Screw (33)–6
D-washer (24)–2
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Extra parts may be included.
Note: Most of the small parts needed for assembly
have been preattached to parts to be assembled.
To Next Page
Loading...
