7
3
1
3
4
4
104
50
58
1
4. Orient the Upright (4) and the Lower Upright
Cover (58) as shown. Slide the Lower Upright
Cover onto the Upright.
Have a second person hold the Upright (4) near
the Frame (1) until step 5. Connect the Upper
Wire (50) to the Lower Wire (104).
3. While a second person lifts the rear of the Frame
(1), attach the Rear Stabilizer (3) to the Frame
with two M8 x 58mm Screws (17), two M8
Split Washers (18), and two M8 Large Curved
Washers (16).
17
18
18
16
16
To Next Page
Loading...
