NordicTrack E8200 Competition Bench - Curl Bar and Upright Assembly Steps

10
88
4
93
2
13
2
59
59
59
1
13. Unfold the rack to the position shown. While a
second person holds the Top Frame (4), attach
it to the Left and Right Uprights (1, 2) with two
M12 x 75mm Bolts (88) and two M12 Washers
(93).
14. Tighten three Weight Storage Tubes (59) onto the
Left Upright (1).
Tighten the remaining three Weight Storage
Tubes (not shown) onto the Right Upright (2).
12. Attach the Curl Pin (115) to the Curl Bar (112)
with an M4 x 15mm Self-tapping Screw (95).
112
115
95
12
88
93
1
14