NordicTrack Elite 2500 - Identify the Right Extension Leg (91). Attach the

8
2. Make sure that the power cord is unplugged.
Identify the Right Extension Leg (91). Attach the
Right Extension Leg to the right Upright (84) with
two 5/16" x 3/4" Screws (1). Start both Screws,
and then tighten them.
Attach the Left Extension Leg (not shown) to
the left Upright (84) in the same way.
3. Identify the Left and Right Upright Covers
(89, 90).
Slide the Left Upright Cover (89) onto the left
Upright (84), and slide the Right Upright Cover
(90) onto the right Upright. Then, press the
Upright Covers downward until they snap into
place.
Remove and save the four indicated 5/16" x 2"
Screws (2).
89
84
84
90
84
2
3
1
91
2
2