TREADMmLL OPERATION
THE PRE-LUBRUCATED WALKUNG BELT
Your treadmill features a walking belt coated with high-
performance lubricant, iMPORTANT: Never apply siF
icone spray or other substances to the waIMng
be_t or the walking p_atform. Such substances will
deteriorate the walking be_t and cause excessive
wear.
HOW TO PLUG mNTHE POWER CORD
tric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. P_ug the power cord into a surge suppressor,
and p_ug the surge suppressor into an appropriate
out_et that is proper_y installed and grounded in
accordance with aH _oca_codes and ordinances.
Important: The treadmill is not compatible with
GFCl-equipped outlets.
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available.
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off. To decrease the possibility of
your treadmill being damaged, a_ways use a surge
suppressor with your treadmill (see drawing 1 at
the right}. To purchase a surge suppressor, see
your _ocal NordicTrack dea_er or call the toll-free
telephone number on the front cover of this man-
ua_ and order part number 146148, or see your _oca_
e_ectronics store.
Use only a sing_e-ouflet surge suppressor that is
UL 1449 _isted as a transient voRtage surge sup-
pressor (TVSS). The surge suppressor must have a
UL suppressed voltage rating of 400 vomts or _ess
and a minimum surge dissipation of 450 joules.
The surge suppressor must be e_ectrica_myrated for
120 volts AC and 15 amps. There must be a moni-
toring _ight on the surge suppressor to indicate
whether it is functioning properRy. Faimure to use a
proper_y functioning surge suppressor could result
in damage to the contro_ system of the treadmi& ff
the contro_ system is damaged, the walking be_t
may change speed, accemerate, or stop unexpect-
edly, which may result in a fall and serious injury.
This product must be grounded. If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-
I
Grounded Outlet Box
_--I _ Surge Suppressor
Grounding Pin
Grounded Outlet Grounding Plug
2
Outlet Box
Adapter
Surge Suppressor
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-poLe receptacle outlet box
covers are not grounded. Contact a qualified e_ec-
trician to determine if the outlet box cover is
grounded before using an adapter.
11
To Next Page
Loading...
