NordicTrack Elite 700 NTL79020.1 - Assembly Steps: Final Console Securing; Securing Console Covers and Handrails

14
12. Attach the Small Console Cover (27) with two
#8 x 3/4" Screws (2); do not overtighten the
Screws. Note: Use the outer two holes in the
underside of the console base assembly (G).
12
27
2
P
I
13
2
2
2
8
8
G
13. Tighten the two 5/16" x 3/4" Screws (8).
Then, tighten four #8 x 3/4" Screws (2) into
the right and left handrail assemblies (I, P) in
the locations shown; do not overtighten the
Screws.