NordicTrack Freestride Trainer FS7i - Page 10

10
133
89
6
6. Identify the Left Pedal Arm (9). Insert the axle
on the Left Pedal Arm into the Left Adjustment
Leg (6).
Attach the Left Pedal Arm (9) with an M8 x
14mm Shoulder Screw (112), an Outer Pedal
Cover (133), and a Pedal Arm Washer (89).
Attach the Right Pedal Arm (132) to the Right
Leg (5) in the same way.
6
9
132
5
7. Rotate the Right Upper Body Arm (7) into the
vertical position.
Attach the Right Upper Body Arm (7) to the Right
Leg (5) with an M8 x 45mm Bolt (124) and an
M8 Locknut (123).
Then, tighten the M8 x 45mm Bolt (124) that is
preattached to the Right Leg (5).
Tip: Avoid pinching the wires (not shown).
Slide the Right Leg Cover B (36) downward and
press it into place.
Repeat this step on the other side of the
elliptical.
112
124
123
7
5
6
36
60
8
7
Avoid pinching
the wires
124