NordicTrack Freestride Trainer FS9i - Page 9

9
3. Attach the Left Large Slot Cover (22) to the Left
Inner and Outer Shields (27, 28) with two M4 x
16mm Screws (98).
Attach the Right Large Slot Cover (142) to the
Right Inner and Outer Shields (21, 23) in the
same way.
4. Attach Pillar Covers A and B (29, 30) around
the Lower Pillar (48) with two M4 x 16mm
Screws (98).
3
4
98
98
29
48
30
142
5
5. Press the Upper Pillar Cover (26) onto the Left
Inner and Outer Shields (27, 28).
Attach the Upper Pillar Cover (26) with an M4 x
10mm Screw (128).
128
26
21, 23
22
27, 28
98
27, 28