NordicTrack FUSION CST PRO - Page 13

13
6
6. Slide the Pull-up Bar (147) onto the M10 x 93mm
Screws (102) in the Left and Right Uprights
(149, 150) that you attached in step 4.
Attach the Pull-up Bar (147) with two additional
M10 x 93mm Screws (102), start both Screws,
but do not fully tighten them yet.
See steps 2–6. Fully tighten all the Screws
(95, 101, 102, 140, 143).
7
102
102
149
102
102
150
147
7. Orient the Tower Top Cover (2) as shown, and
press it onto the top of the Frame (1).
2
1