15
10. Tighten a Storage Tube (144) into the Right
Upright (150).
Attach the other Storage Tube (144) to the
Left Upright (not shown) in the same way.
11. Orient a Weight Rest (141) as shown, insert it
into an adjustment hole in the Left Upright (149),
and rotate it in the direction shown by the arrow.
Attach the other Weight Rest (141) to
the Right Upright (150) in the same
way. IMPORTANT: Make sure to set both
Weight Rests at the same height.
Attach the Weight Spotters (142) to the
Left and Right Uprights (149, 150) in the
same way.
IMPORTANT: Make sure to place the Weight
Spotters (142) below the Weight Rests (141).
Make sure that there are at least three adjust-
ment holes between the Weight Rests and
the Weight Spotters.
10
11
144
144
150
150
141
142
142
141
149
To Next Page
Loading...
