EasyManua.ls Logo

NordicTrack Gx 3.2 Bike - Power Connection & Final Inspection

NordicTrack Gx 3.2 Bike
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
11
12. Make sure that all parts are properly tightened before you use the exercise bike. After the exercise
bike is assembled, inspect it to make sure that it is assembled correctly and that it functions properly.
Note: Extra parts may be included. Place a mat under the exercise bike to protect the floor or carpet.
11. Plug the Power Adapter (66) into the receptacle
on the Frame (1).
If necessary, plug the Power Adapter (66) into
the Plug Adapter (67).
To plug the Power Adapter (66) into an outlet,
see HOW TO PLUG IN THE POWER ADAPTER
on page 12.
Note: The Console (13) can also be operated
with four D batteries (not included); alkaline
batteries are recommended. Do not use old and
new batteries together or alkaline, standard,
and rechargeable batteries together. Remove
the screws, remove the battery cover, insert the
batteries into the battery compartments, and
reattach the battery cover. Make sure to ori-
ent the batteries as shown by the diagrams
inside the battery compartments.
67
66
1
Battery
Cover
Batteries
Batteries
Screws
13

Other manuals for NordicTrack Gx 3.2 Bike

Related product manuals