NordicTrack Gx 3.2 Bike - Front Stabilizer & Seat Post Adjustment

7
3. Attach the Front Stabilizer (2) to the Frame (1)
with two M10 x 95mm Screws (76).
3
2
76
1
4
6
Adjustment
Holes
1
27
4. Loosen the Adjustment Knob (27) in the Frame
(1) a few turns.
Orient the Seat Post (6) as shown. Then, pull
the Adjustment Knob (27) outward and insert the
Seat Post into the Frame (1).
Slide the Seat Post (6) upward or downward to
the desired position, and release the Adjustment
Knob (27).
Move the Seat Post (6) upward or downward
slightly to make sure that the Adjustment
Knob (27) is engaged in one of the adjust-
ment holes in the Seat Post. Then, tighten the
Adjustment Knob.