11
11
12
74
73
11. Attach the Console Cover (73) to the top of the
Upright (74) with two #8 x 1/2" Screws (12). Do
not overtighten the Screws.
12. Make sure that all parts are properly tightened before you use the incline trainer. Keep the included hex
keys in a secure place. One of the hex keys is used to adjust the walking belt (see pages 22 and 23). To pro-
tect the floor or carpet from damage, place a mat under the incline trainer.
10. Attach the Console (84) to the plate on the Yoke
(88) with four #8 x 3/4" Screws (1). Be careful
not to pinch any wires. Start all four Screws
b
efore tightening any of them. Do not over-
tighten the Screws.
1
0
1
1
88
8
4
To Next Page
Loading...
