9
6. Slide the two Handrail Covers (76) onto the
lower ends of the Left and Right Handrails (69,
75). See the inset drawing. Make sure that
t
he curved end of each Handrail Cover is fac-
ing the Upright (74).
Slide the lower ends of the Handrails (69, 75)
onto the brackets on the Upright (74).
Attach each Handrail (69, 75) to the Upright (74)
with two 1/4" x 1" Patch Bolts (32) and two 1/4"
Flat Washers (25); do not fully tighten the
Patch Bolts yet.
6
75
74
69
76
32
76
25
32
25
Bracket
76
Curved End
7. Attach the Yoke (88) and the Yoke Spacer (87)
to the Upright (74) with two 3/8" x 5" Bolts (7)
and two 3/8" Star Washers (9). Firmly tighten
the Bolts.
Remove the wire ties from the Upright Wire (72)
and the Pulse Wires (70, 71).
Firmly tighten the 5/16" x 3/4" Bolts (6).
See step 6. Firmly tighten the 1/4" x 1" Patch
Bolts (32), and slide the Handrail Covers (76)
down over the Bolts and against the Upright (74).
7
74
7
9
88
6
6
Wire
Ties
72
Bracket
70
71
87
To Next Page
Loading...
