11
1
0
89
1
104
1
1
8
7
104
1
10. Attach the Console Back (89) to the Console
Cover (87) with two #8 x 1 1/2" Screws (104)
and twelve #8 x 3/4" Screws (1). Start all four-
t
een Screws, and then tighten each of them.
Do not overtighten the Screws. Make sure no
w
ires are pinched.
1
1
11. Press the Left and Right Accessory Trays (99,
100) into the Console Cover (87).
Slide the two Handrail Covers (76) down against
the Handrails (88).
11
100
99
76
88
88
76
87
12. Make sure that all parts are properly tightened before you use the incline trainer. Keep the included hex
keys in a secure place. One of the hex keys is used to adjust the walking belt (see pages 22 and 23). To pro-
tect the floor or carpet from damage, place a mat under the incline trainer.
To Next Page
Loading...
