13
13. Attach the Pulse Crossbar (81) to the console
assembly with six #8 x 1/2" Screws (1). Start all
six Screws, and then tighten them.
Firmly tighten the four 5/16" x 5/8" Screws (11).
14. Firmly tighten the four 3/8" x 2 3/4" Screws (22),
and then tighten the four 3/8" x 1 1/4" Screws (3)
(only one side is shown).
Press the Left Base Cover (88) and the Right
Base Cover (not shown) onto the Base (29) until
they snap into place.
13
14
81
22
29
Console
Assembly
11
88
11
1
3
3
1
1
To Next Page
Loading...
