9
5. Identify the Left and Right Base Covers (88, 89).
Slide the Left Base Cover onto the Left Upright
(84). Slide the Right Base Cover onto the Right
Upright (85). Do not press the Base Covers
into place yet.
84
88
85
89
5
6. Identify the left Handrail (79). If there is a wire in
the left Handrail, remove and discard it.
Hold the left Handrail (79) near the Left Upright
(84). Insert the wire tie on the Upright Wire (91)
into the bottom and out of the end of the left
Handrail as shown. Then, pull the Upright Wire
through the Left Handrail.
Attach the left Handrail (79) to the Left Upright
(84) with two 5/16" x 2 3/4" Screws (12) and two
5/16" Star Washers (8). Make sure not to pinch
the Upright Wire (91). Do not tighten the
Screws yet.
Remove and discard the two indicated screws
(C) from the left Handrail (79).
12
8
79
84
Wire
Tie
91
6
C
To Next Page
Loading...
