NordicTrack NTL14011.0 - Frame Raising and Storage Latch Installation

11
10. Raise the Frame (56) to the position shown.
Have a second person hold the Frame until
step 11 is completed.
Orient the Storage Latch (53) so that the large
barrel and the latch knob are oriented as shown.
Attach the lower end of the Storage Latch (53) to
the Base (97) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (11).
10
53
Large
Barrel
56
Latch
Knob
11
3
97
9. Firmly tighten the four 3/8" x 2 3/4" Screws (7),
and then tighten the four 3/8" x 1 1/4" Screws (8)
(only one side is shown).
Press the Left and Right Base Covers (92, 93)
onto the Base (97) until they snap into place.
9
93
8
92
97
7