26
6. Calibrate the incline system of the treadmill.
Touch Calibrate Incline, and then touch Begin to
calibrate the incline system. The treadmill will auto-
matically rise to the maximum incline level and then
return to the starting position. This will calibrate
the incline system. When the incline system is
calibrated, touch Finish. Note: Occasionally, the
incline calibration may run automatically when
you turn on the treadmill.
IMPORTANT: Keep pets, feet, and other objects
away from the treadmill while the incline
system is calibrating. In an emergency, pull
the key from the console to stop the incline
calibration.
7. Exit the settings menu.
If you are in a settings menu, touch the back arrow
to exit.
To Next Page
Loading...
