12
6
91
1
76
84
1
7. Hold the Tray (79) near the Right Upright (84).
Locate the tie (F) in the indicated hole (G) in the
Right Upright. Wrap the tie around the end of
the fan wire (H). Next, pull the fan wire into the
hole and out of the top of the right Upright. Then,
remove the tie.
Attach the Tray (79) to the Upright Crossbar (76)
with four #8 x 3/4" Truss Head Screws (24); start
all four Truss Head Screws, and then tighten
them.
7
24
84
H
76
24
79
G
F
6. Carefully slide the Upright Crossbar (76)
between the Right and Left Uprights (84, 91).
Attach the Upright Crossbar with four 5/16" x
3/4" Screws (1); start all four Screws, and then
tighten them.
To Next Page
Loading...
