13
I
H
I
91
83
74
74
8
8
9. Set the console assembly (J) face down on a
soft surface to avoid scratching the console
assembly.
Remove and discard the four indicated screws
(K). Then, remove the Pulse Crossbar (80).
8
2
2
8. Attach the two Handrails (74) to the Right and
Left Uprights (84, 91) with two of the 5/16" x 2"
Screws (2) that you removed in step 5 and two
5/16" Star Washers (8); do not fully tighten
the Screws yet. Be careful not to pinch the
Upright Wire (83) or the fan wire (H) on the
right side. Position the wires as shown.
Then, remove and discard the two indicated
screws (I).
84
J
80
K
9
K
K
To Next Page
Loading...
