NordicTrack NTL61011.0 - Page 12

12
10. Attach the two Console Clamps (96) to the con-
sole assembly with four #8 x 3/4" Screws (6).
See step 3. Tighten all six 3/8" x 4" Screws (4).
10
96
Console
Assembly
6
97
98
6
6
6
6
Console
Assembly
11
11. Identify the Left and Right Trays (97, 98), which
are marked “L” and “R.” Orient the Trays as
shown and attach each Tray with four #8 x 3/4"
Screws (6). Start all of the Screws before
tightening them. Be careful not to over-
tighten the Screws.