NordicTrack NTL99011.3 - Treadmill Assembly - Console Mounting; Securing the Console Assembly to Handrails

12
12. Set the Console (103) onto the Console Base
(64). Make sure that none of the wires from
the Console are pinched.
Attach the Console (103) to the Console Base
(64) with six #8 x 1/2" Screws (1).
12
1
1
103
1
64
1
Wires
11. Set the console assembly on the brackets on
the Handrails (87). Be careful not to pinch any
wires.
Attach the console assembly with the four 1/4"
x 1/2" Screws (4) that you removed in step 8
and four 1/4" Star Washers (5). Start all four
Screws and then tighten them.
11
87
87
4
5
5
Console
Assembly
4