NordicTrack NTL99115.1 - Partially Tighten Two 3;8 X 1 1;2 Screws (3) with

9
3. Attach the Left Upright (62) to the Base (69) with
two 3/8" x 2 1/4" Screws (1) and two 3/8" Star
Washers (2); do not fully tighten the Screws
yet. Be careful not to pinch any wires.
4 . Partially tighten two 3/8" x 1 1/2" Screws (3) with
two 3/8" Star Washers (2) and two 3/8" Nuts
(4) as shown into the Left Upright (62); do not
fully tighten the Screws yet. Be careful not to
pinch any wires.
Attach the Right Upright (not shown) as
described in steps 3 and 4. Note: There are no
wires on the right side.
2
4
3
3
2
2
1
1
69
62
62
3
4