12
13
10
77
77
13. Slide the Accessory Tray (56) onto the Seat
Handlebar (10).
Attach the Accessory Tray (56) with four
M4 x 16mm Screws (77); start all the Screws,
and then tighten them.
88
10
9
25
14
14. Orient the Seat (9) as indicated by the sticker.
Attach the Seat (9) to the Seat Handlebar (10)
with four M6 x 18mm Screws (25) and four M6
Washers (88) (only two of each are shown);
start all the Screws, and then tighten them.
56
To Next Page
Loading...
