NordicTrack S45i - Treadmill Assembly Instructions (continued); Attaching Crossbars and Trays to Uprights

15
14. Attach the Pulse Crossbar (93) to the console
assembly (K) with four #8 x 1/2" Screws (1);
start all four Screws, and then tighten them.
Then, firmly tighten the four 5/16" x 3/4"
Screws (4).
14
93
4
4
1 1
K
15. Orient the Upright Crossbar (98) as shown.
Carefully slide the Upright Crossbar (98)
between the Left and Right Uprights (89, 90).
Attach the Upright Crossbar (98) with the four
5/16" x 3/4" Screws (4) that you removed in
step 5; start all four Screws, and then tighten
them.
15
89
98
4
4
90
16
98
1
1
48
16. Insert the Tray (48) from the front of the treadmill
and set it on the Upright Crossbar (98) as
shown.
Attach the Tray (48) to the Upright Crossbar
(98) with four #8 x 1/2" Screws (1); start all four
Screws, and then tighten them.