14
16. Raise the Frame (56) to the position shown.
Have a second person hold the Frame until
step 17 is completed.
Orient the Storage Latch (53) so that the large
barrel and the latch knob are in the positions
shown.
Attach the lower end of the Storage Latch (53) to
the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (12).
16
53
Large
Barrel
56
Latch
Knob
12
3
94
15. Firmly tighten the two 3/8" x 2 3/4" Screws (7)
on the left side of the treadmill. Then, tighten the
two 3/8" x 1 1/4" Screws (8).
Repeat this step on the right side of the
treadmill.
Press the Left and Right Base Covers (82, 83)
onto the Base (94) until they snap into place.
15
83
8
82
94
7
To Next Page
Loading...
