15
18. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the oor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used
to adjust the walking belt (see page 32).
17. Attach the upper end of the Storage Latch (53)
to the Frame (56) with a 3/8" x 2" Bolt (3) and a
3/8" Nut (12).
See HOW TO LOWER THE TREADMILL FOR
USE on page 30. Lower the Frame (56).
17
53
12
56
3
To Next Page
Loading...
