12
11. With the help of a second person, hold the con-
sole assembly near the left Handrail (86).
Make sure that the pulse wire (D) is inserted
through the three looped Cable Ties (99).
Route the pulse wire (D) as shown, and insert
the pulse wire into the gap indicated by the
arrow.
86
D
11
10. Set the console assembly face down on a soft
surface to avoid scratching the console
assembly.
Attach the Right and Left Trays (27, 36) with
eight #8 x 1/2" Screws (1). Do not overtighten
the Screws.
Remove the four indicated 1/4" x 1/2" Screws
(31) from the Console Frame (18); the Screws
will be used in a later step.
Console
Assembly
1
10
31
31
1
1
18
1
27
36
99
99
Console
Assembly
12. With the help of a second person, hold the con-
sole assembly near the right Handrail (86).
Make sure that the Upright Wire (81) is inserted
through the two looped Cable Ties (99).
Route the Upright Wire (81) as shown, and insert
the Upright Wire into the gap indicated by the
arrow.
Console
Assembly
99
99
81
12
86
99
To Next Page
Loading...
