13
13. Set the console assembly on the brackets on
the Handrails (86). Be careful not to pinch any
wires.
Attach the console assembly with the four 1/4"
x 1/2" Screws (31) that you removed in step 10
and four 1/4" Star Washers (32). Start all four
Screws, and then tighten them.
13
86
31
32
Console
Assembly
31
32
86
14. Set the Console (80) onto the Console Base
(64). Make sure that none of the wires from
the Console are pinched.
Attach the Console (80) with six #8 x 3/4"
Screws (2).
14
80
2
64
Wires
2
To Next Page
Loading...
