13
15. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the oor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex key in a secure place; the hex key is used to adjust
the walking belt (see pages 25 and 26).
13. Raise the Frame (60) to the position shown.
Have a second person hold the Frame until
step 13 is completed.
Orient the Storage Latch (61) so that the large
barrel and the latch knob are oriented as shown.
Attach the lower end of the Storage Latch (61) to
the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (10).
13
61
60
10
3
94
Large
Barrel
Latch
Knob
14. Attach the upper end of the Storage Latch (61)
to the bracket on the Frame (60) with a 3/8" x
1 3/4" Patch Bolt (6) and a 3/8" Nut (10).
Lower the Frame (60) (see HOW TO LOWER
THE TREADMILL FOR USE on page 23).
14
61
10
60
6
To Next Page
Loading...
