NordicTrack T5.7 NTL61011.1 - Page 12

12
11. Attach the two Console Clamps (96) to the con-
sole assembly with four #8 x 3/4" Screws (6).
See step 3. Tighten all six 3/8" x 4" Screws (4).
10. Set the console assembly on the Left and Right
Handrails (71, 72). Make sure that no wires
are pinched. Insert the excess Upright Wire
(70) into the Left Handrail.
Attach the console assembly to the brackets
on the Handrails (71, 72) with two 5/16" x 1"
Screws (7) and two 5/16" Star Washers (8).
Start both Screws, and then tighten them.
11
10
87
96
71
Console
Assembly
Console
Assembly
7
6
7
8
8
70
72
97
98
6
6
6
6
Console
Assembly
12
12. Identify the Left and Right Trays (97, 98), which
are marked “L” and “R.” Orient the Trays as
shown and attach each Tray with four #8 x 3/4"
Screws. Start all of the Screws before tight-
ening them. Be careful not to overtighten the
Screws.