11
14. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear
plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread-
mill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; a hex key is used
to adjust the walking belt (see pages 23 and 24).
13. Press the Left Accessory Tray (99) and the
Right Accessory Tray (106) into the console as-
sembly.
99
106
1
3
Console
Assembly
To Next Page
Loading...
