NordicTrack Tl T 7.0 Treadmill - Page 13

13
13. Set the console assembly on the handrail as-
semblies (C, E). Make sure that no wires are
pinched. Insert the excess Upright Wire (91)
behind the Console Frame (101).
Attach the console assembly to the brackets
on the handrail assemblies (C, E) with the four
5/16" x 5/8" Screws (11) that you removed
in step 9. Start all four Screws, but do not
tighten them yet.
13
E
Console
Assembly
11
11
91
C
14. Attach the Pulse Crossbar (81) to the console
assembly with six #8 x 1/2" Screws (1). Start all
six Screws, and then tighten them.
Firmly tighten the four 5/16" x 5/8" Screws (11).
14
81
Console
Assembly
11
11
1
1
1
101
15. Tighten all six 3/8" x 4" Screws (3).
15
3
3