8
2. Attach two Base Feet (81) to the base of the
Uprights (85) in the indicated locations with two
#8 x 1" Tek Screws (82).
85
81
8
2
82
2
3. With the help of a second person, carefully tip
the treadmill onto its other side as shown.
Partially fold the Frame (55) so that the treadmill
is more stable. Do not fully fold the Frame
until the treadmill is completely assembled.
Insert the other Base Extension (97) into the in-
dicated bracket on the base of the Uprights (85).
Attach the Base Extension (97) with two 5/16" x
2" Bolts (87), two 5/16" Star Washers (75), and
two Base Extension Nuts (91) as shown. Firmly
tighten the Bolts.
87
75
85
91
97
55
3
4. Attach two Base Feet (81) to the base of the
Uprights (85) in the indicated locations with two
#8 x 1" Tek Screws (82). Note: One replacement
Base Foot may be included. Use the Base Foot
to replace any Base Foot that becomes worn.
With the help of a second person, carefully tip
the treadmill so that the Base Feet (81) are rest-
ing on the floor and the Uprights (85) are in the
vertical position.
81
82
82
85
4
81
81
Bracket
To Next Page
Loading...
