NordicTrack VX550 - Part Identification Chart

5
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number below each drawing is the key
number of the part, from the PART LIST near the end of this manual. The number following the key number is the quan-
tity needed for assembly. Note: If a part is not in the hardware kit, check to see whether it has been preassembled.
NO：32*1 33*1 34*1
NO：75*1
NO：76*1
NO：16*6 17*6 18*6
NTIVEX47016.0
NO：53*4
NO：13*1
NO：14*1
NO 3*4