How to troubleshoot a nordlux Lighting Equipment that won't turn on?
If your nordlux Lighting Equipment isn't working, check the power supply and fuse. Also, make sure the lamp is correctly fitted and not broken. Finally, inspect the wiring for any issues.
Why is my nordlux Lighting Equipment lamp always on?
If the lamp on your nordlux Lighting Equipment stays on constantly, the manual override might be activated. Turn it off. Also, check the wiring to ensure it's correct.
What to do if my nordlux Lighting Equipment lamp triggers for no reason?
If your nordlux Lighting Equipment lamp is triggering unnecessarily, reposition the lantern. High winds can also cause false triggers; this is usually temporary, but you can switch the lantern off if it's annoying.
Why is the sensing range too short on my nordlux Lighting Equipment?
If the sensing range of your nordlux Lighting Equipment is too short, the unit might be fixed too high, or the angle of approach into detection bands is incorrect. Try moving the unit to a lower height and/or changing the angle of approach. Also, other lighting might be interfering with the sensitivity of the PIR sensor, so move the lantern away from other lighting.
What to do if nordlux Lighting Equipment doesn't work in normal operation?
If your nordlux Lighting Equipment doesn't work in normal operation, it might be due to the area being too light, for example, from nearby lighting. If required, reposition the lantern.
How to switch off Test Mode on nordlux Lighting Equipment?
To switch off Test Mode on your nordlux Lighting Equipment, ensure nothing crosses the detection area for more than 40 seconds, as the PIR may be triggered.
How to operate Test Mode on nordlux Lighting Equipment?
To operate Test Mode on your nordlux Lighting Equipment, switch OFF-ON OFF-ON within 10 seconds of powering up the device.
Why does nordlux Lighting Equipment lamp stay on for more than 1 minute in Normal Mode?
If the lamp in Normal Mode stays on for more than 1 minute, the PIR sensor has likely been triggered again within that 1-minute time period. The light will automatically switch off approximately 1 minute after the last signal the PIR receives.
Details the 15-year warranty for Nordlux outdoor lamps, covering corrosion and requiring proof of purchase.
Maintenance guidelines for stainless steel outdoor lamps, focusing on surface treatment and rust prevention.
Instructions for caring for copper, brass, and tombac lamps, noting patina development and environmental effects.
Care instructions for aluminum lamps, including cleaning, environmental advice, and color preservation.
General| Brand | nordlux |
|---|---|
| Model | VEJERS |
| Category | Outdoor Light |
| Language | English |
To Next Page
