What to do if there is no sound from my Nordmende Transita 120 IR Radio?
If you can't hear any sound from your Nordmende Radio, first, try increasing the volume. Also, if you are trying to listen via the speaker, make sure the headphones are unplugged. Finally, check that the correct source has been selected.
How to fix a Nordmende Transita 120 IR that will not turn on?
If your Nordmende Radio won't switch on, try charging the battery or connecting the power supply. Ensure that the mains power switch is also turned on.
Why is the sound weak on my Nordmende Transita 120 IR Radio?
If the sound from your Nordmende Radio is weak or of poor quality, the issue may be interference from other devices like televisions. Try moving the radio further away from these devices. Also, make sure the antenna is fully extended and correctly oriented. Rotate the antenna to improve reception.
What to do if the display on my Nordmende Transita 120 IR does not switch on?
If the display on your Nordmende Radio does not switch on, switch the device off, remove and reinsert the mains plug, and then switch the device back on. Also, check the display brightness setting.
What to do if my Nordmende Transita 120 IR is not receiving DAB signal?
If your Nordmende Radio is not receiving a DAB signal, first check whether DAB reception is available in your region. Readjust the antenna and try to receive other stations.
Why is the sound distorted on my Nordmende Transita 120 IR Radio?
If you hear distorted sound from your Nordmende Radio, a mobile phone or another device might be emitting disruptive radio waves nearby. Remove the mobile phone or the other device from the vicinity of the radio.
Introduction, intended use, target audience, and manual formatting conventions.
Front and rear panel layout, buttons, and ports identification.
Essential safety precautions, device setup guidelines, and proper disposal methods.
Scope of delivery, radio features, and initial setup wizard for configuration.
Device operation, menu navigation, volume control, and switching radio modes.
Using DAB/DAB+, FM, Internet radio, and AUX input for audio playback.
Configuring alarms, sleep function, equalizer, time, language, and backlight.
Internet connection, WPS, software updates, cleaning, and factory reset procedures.
Resolving device problems, radio reception issues, technical specifications, and notices.
To Next Page
General