1-8
Safety
9.
Thermoplastic Hot Melt
Material
10. Equipment and Material
Disposal
11. Polyurethane Reactive
('
PUR")' Hot Melt Material
NOTE: Always
refer to the material manufacturer's
Material
Safety Data
Sheet
(MSDS)
or material information sheet before working with any hot
melt material.
a
a
Ensure the work
area
is
adequately ventilated.
Do not exceed recommended
processing
temperatures. Doing so
creates a danger to
personnel
due
to decomposition of the
material
Dispose
of equipment and materials used in
operation and
cleaning
according
to local regulations.
NOTE:
Always refer to
the
material
manufacturer's Material Safety Data
Sheet
(MSDS)
or material information sheet
before
working with
any hot
melt material.
WARNING:
Exercise extreme caution and
always
provide
adeqqate ventilation
when using reactive materials.
WARNING: Only
use
PUR
material in units that are designed
to
process
such material. Using PUR material in units that
cannot
process
them can cause damage to the unit and
premature
reaction
of the hot melt material.
WARNING:
PUR material contains isocyanate ingredients
which will
irritate skin, mucous membranes of eyes and
respiratory
passages.
WARNTNG: Persons witn
eiisting asthmatic conditions may
experience
diff iculty in breathing.
A
A
AIEN{2-[XX-SAFE]-2
42-72
lssued
11/94
o
1995 Nordson
Corporalion
All rights r€serued
To Next Page
Loading...
