lnstallation 3-7
t
4203051
Fig. 3-10 Connecting the
Electical
Switch
(if
applicable)
Connecting
the Heater
@ontd.)
CAUTION:
When replacing the
pivot-sleeve
shells, do not
pinch
wires between the
shells
and
the
pivot
sleeve.
An
electrical short can
occur if wires are
pinched.
8.
Replace the
pivot
sleeve shells and secure
with screws.
Electrical Switch
Con necti on s
(if
ap
pli
cable)
9. lf
your
handgun has an electrical switch,
follow steps a and b to
connect the
electrical switch:
a. Find the
orientation lug on the hose-cordset
connector and ensure
that the connector
and switch
plug
at the bottom
of the handgun's
handle are
properly
aligned.
b. Attach the switch
plug
assembly at the bottom of the
handle to the
connector on the hose cordset.
10. Follow the
hose installation instructions
in
your
applicator
product
manual to connect
the hose to the applicator.
@
1995 Nordson CorpoEtion
All
dghts reseryed
42-72
lssued
10/95
A3EN-04-[AD-31Ex]-l
To Next Page
Loading...
