4-2 Operation
2. Preparation for First
Operation
(contd.)
A
@
@
@
A
WARNING: Do not operate the handgun with its
pivot
sleeve
shells or handles removed or damaged. The handgun
contains
voltages
that can be fatal.
CAUTION:
Do
not swivel
or
trigger the handgun
while it is cold
This can damage the handgun.
CAUTION: On models with a microswitch, take care
when
swiveling the handgun.
Aggressive
motion of the
hose and
handle can damage the handgun.
WARNINGi Hot! Risk of burns. Wear heat-protective
clothing,
safety
goggles,
and heat-protective
gloves.
WARNING: Risk of burns. To
prevent
inadvertent discharge
during startup, leave the trigger safety
in
the locked
position
until completing the startup
procedure.
1.
Check that the trigger
safety is in
the
locked
position
2.
Refer to
your
applicator
product
manual
and
bring the adhesive to
operating temperature; then, turn on the applicator
pump.
NOTE: On standard
models,
the
pump
is
continuously running. On
models with an electricalswitch, the
pump
runs when
the
handgun is
triggered.
3. Refer to
your
applicator
product
manual and adjust the system
hydraulic
pressure
to the required operating
pressure.
3. Startup
Fig.4-l Lock Positions
1. Unlocked
position
2. Locked
position
1
2
t
4203002
A4EN-os-[AD-31XX]-1
42-72
lssued
10/95
o
1995 Nordson Corporation
All rights reseru€d
To Next Page
Loading...
