Nordson AltaBlue - Hopper Assembly

Parts
9-16
Part 1120130
E 2011 Nordson Corporation
Hopper Assembly
The hopper assembly parts vary depending on the size of the melter:
one/two‐pump, three/four‐pump. Refer to the correct parts list for your melter.
One/Two‐Pump Melter Hopper Parts
See Figure 9‐8.
Item Part Description Quantity Note
— ‐ ‐ ‐ ‐ ‐ ‐ ‐ Assembly, hopper, one/two pump —
201 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Hopper/grid, machined 1
202 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Washer, flat, narrow, M6 20
203 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Washer, lock split, M6 40
204 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Screw, socket, M6 x 25 20
205
7400135 S Gasket, hopper, 30L/50L, one/two pump 1
7400134 S Gasket, hopper, 15L, one/two pump 1
206 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Screw, pan, recessed, M3 x 8 2
207 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Lock washer, external, M3 2
208 7401366 S Thermoswitch, ALTABLUE 1
209
7400298
S Service Kit, Heater, 240V, 800W, 1/2 X 11.65
(one/two pump melter 30/50L hopper)
4 or 8
7400876
S Service Kit, Heater, 240V, 500W, 1/2 X 6.38
(two‐pump hopper)
4
210 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Washer, flat, oversize, M6, 22 OD 8
211 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Screw, socket, M6 x 10 8
212 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Frame, tank, paint 2
213 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Washer, flat, regular, M6 12
214 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Nut, hex, M6 12
215 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Washer, flat, regular, M8 4
216 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Washer, lock, split, M8 4
217 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Nut, hex, M8 4
218 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Panel, rear, hydraulic 1
219 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Panel, front, hydraulic 1
220 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Bracket, heater terminal 1
221 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Screw, flat, socket, M4 x 12 2
222 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Heater, terminal block assembly 1
223 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Washer, flat, regular, M5 6
224 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Washer, lock split, M5 6
225 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Nut, hex, M5 2
226 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Panel, top, hydraulic 1
227 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Lid, outer 1
228 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Lid, inner 1
229 ‐ ‐ ‐ ‐ ‐ ‐ ‐ S Screw, pan, slotted, M3 x 6 8
Continued...