Nordson AltaBlue - Navigating the Touch Screen Displays; About the Main Display

About the Touch Screen Display and User Interface
4-2
Part 1120130
E 2011 Nordson Corporation
Navigating the Touch Screen Displays
The AltaBlue Touch Series Melter consists of the following displays:
S One Main display
S Four Primary displays:
a. Monitor
b. Operator
c. Settings
d. System
The following sections explore each display in greater detail.
About the Main Display
Use the Main Display as the central location where you can access the
following displays:
*View color coded zone
and pump status
*Master On/Off controls
*Enable/disable
individual zones
and pumps
*Modify zone and
pump settings
View melter
status
Configure and modify
temperature
and pump settings
Configure and modify
system
and melter settings
Figure 4‐1 The Main Display
Accessing the Main Display
The Main Display appears when you Touch located in the upper
left corner of any primary display.