Nordson AltaBlue - State and Status Indicators from the Operator Display

About the Touch Screen Display and User Interface
4-6
Part 1120130
E 2011 Nordson Corporation
Use the Operator Display to
S View the colorcoded zone and pump state and status colors
S Switch Master Controls (Heaters, Pumps and Standby) On/Off
S Enable/Disable individual zones
S Modify zone setpoint temperatures
S Enable/Disable individual pumps
S Modify pump operation
S Adjust RPM speed
State and Status Indicators from the Operator Display
The following tables detail what the state and status colors indicate for
zones, pumps and the master controls.
Zone and Pump State Color Indicators
Color State
Green Enabled
White Disabled
Gray Not Available
Zone and Pump Status Color Indicators
The following table describes what each zone/pump status color indicates.
Color Status
Green
S Zone at setpoint temperature and operating
normally.
S Pumps operating normally.
Yellow
S Heating /Cooling All Internal and External
zones are either heating to/ from their setpoint
temperatures.
S Alert Condition – The system has detected an
Internal/External Zone alert.