Operating Parameters
B-1
Part 1107600_03
2014 Nordson Corporation
Appendix B
Operating Parameters
Operating parameters are organized in this appendix according to the logical
groups listed in Table B‐1. For information about selecting and editing
operating parameters, refer to Section 3, Installation, Setting Up the Melter.
NOTE: Parameter numbers that are reserved or that are not used do not
appear in this appendix.
Table B‐1 Parameter Groups
Group
Parameter
Numbers
Group Description
Standard
0 to 8 and
10 to 14
Frequently used parameters
Pressure Control 15 to 17 Configure pressure settings
Temperature Control 20 to 29 Control heater function
Input Setup 34 to 39 Configure the standard and optional inputs
Output Setup 42 to 46 Configure the standard and optional outputs
Seven-day Clock 50 to 77 Configure the clock feature
Automatic Fill Timer 78 Configure the external motor control switch
PID Selection 80 to 91 Configure the PID settings
To Next Page
Loading...
