Nordson ProBlue Fulfill - Overview of Pneumatic and Mechanical Components; (A). Adhesive Transfer Hose; (B). Adhesive Storage bin

ProBlue Fulfill Integrated Fill System
5
Part 1101094_02
E 2012 Nordson Corporation
Overview of Pneumatic and Mechanical Components
C
B
E
A
D
F
Figure 2 Overview of Fulfill system components
(A). Adhesive Transfer Hose
The adhesive transfer hose connects the suction lance to the lid assembly.
Thetransferhoseconveysadhesivefromtheadhesivestoragebintothe
melter tank.
(B). Adhesive Storage Bin
Place adhesive in the adhesive storage bin. The bin contains a gasket that
prevents debris from entering the bin. For best results, break up the adhesive
as much as possible when emptying into the bin. Do not get the adhesive
wet.